Sep 01, 2016 - 10:29 AM
I have several of these Dimmer 2s, One has 10 x 6W Kosnic Dimmable LEDs on it, others have as little as one. All have Bypass 2 fitted. Hope that helps
Sep 01, 2016 - 05:07 PM
The Fibaro Dimmer 2 is rated at 250W. Depending on your selected LED GU10 bulbs which are probably around 4-7W each, you should be able to easily use it with more than 25 bulbs, so more than enough for most use cases. Note that it has a minimum load of 50W, so you will probably need the Fibaro Bypass 2 when using LED bulbs. The Fibaro Dimmer 2 should work with all types of bulbs, so as long asit you use a dimmable LED bulb then it should be fine.
Sep 02, 2016 - 04:36 AM
There are a few things to clarify on the dimmer. LEDs are different to traditional bulbs, so the maximum load for the dimmer is 200VA. The VA value is calculated for the LEDs by multiplying the LED Wattage with it's Power Factor (typically 0.5 to 0.7). Typically we woul recommend keeping the LED load to less than 100W (this then accounts for the power factor). This is explained in detail in this guide - http://www.vesternet.com/resources/ap...
Oct 29, 2016 - 12:22 PM
I'm using successfully with 16x 6w dimmables if it helps
Add New Comment