Question 1

Malcolm

could you use this with an existing wired door bell to replace the sounder?

Asked 11 months ago 1 answer

Z-Wave Fibaro Smoke Sensor

Question 2

Mr Andrew Miller

Will this fit in a recessor AEO_DSE010

Asked 11 months ago 1 answer

Z-wave plus aeotec z-pi 7

Question 3

Henry Leung

Did it include the Rechargeable Lithium Battery in the package?

Asked 12 months ago 1 answer

Z-Wave Qubino Flush Relay x 2 Plus

Question 4

Dan. F

Does anyone know if these are 100kbps devices? The original universal binary sensor was 40k

Asked 12 months ago 2 answers

Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 5

CyB0rgg

Hi, anyone using it with Athom Homey ? Does it show correctly both the power and energy ? Non-USB version of the UK plug is not showing the power at all ..

Asked 1 year ago 1 answer

Z-Wave Qubino Flush Relay x 1 Plus

Question 6

James

Can this be configured so that when the switch is off then power is still sent to the light bulb? I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off.

Asked 1 year ago 1 answer

Z-Wave Qubino Flush Relay x 2 Plus

Question 7

James

Can this be configured so that when the switch is off then power is still sent to the light bulb?I have a smart light bulb and I want to be able to use this switch to send the command to turn on and off the light and also be able to turn the smart light bulb on through an app even if the switch is off.

Asked 1 year ago 1 answer

Z-Wave TKB Single Paddle Wall Dimmer TZ35S - Gen5

Question 8

Arno

I have a small, simple propane fireplace with a 2 wire connection (heat only) that needs to be controlled by a battery powered thermostat. Would this work?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec WallMote Quad

Question 9

Wayne Robinson

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed ?? Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by Guest_vs.

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Doorbell 6

Question 10

Wayne Robinson

Is there a Device Handler so that this works with smartthings? Although Frient is listed as a partner when adding a device, the keypad is not listed 🙁 Alternatively, maybe another keypad so I can use it with a konnected alarm panel for deactivation by guests.

Asked 1 year ago 1 answer

Zigbee Frient Keypad

Question 11

Ed Johnson

Would this be suitable to independently control multiple infrared panel heaters?I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures.

Asked 1 year ago 1 answer

Z-Wave Heatit Z-DIN 616

Question 12

Ed Johnson

Would this be suitable to independently control multiple infrared panel heaters? I have a fibaro HC3 and would use Aeotec multi sensors to monitor temperatures.

Asked 1 year ago 1 answer

Z-wave plus aeotec z-pi 7

Question 13

David Burton

Do the Vesternet 2,4 & 8 button z wave wall controllers work with Vera Edge?

Asked 1 year ago 1 answer

Z-Wave Qubino Flush Relay x 2 Plus

Question 14

John

What Z-wave frequencies does the model you are selling work on ? I'm after one that will work in Aus (919.8 MHz, 921.4 MHz)

Asked 1 year ago 1 answer

LED Light Strip varm vit - 2700 Kelvin

Question 15

John

What Z-wave frequencies does the model you are selling work on ?I'm after one that will work in Aus (919.8 MHz, 921.4 MHz)

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec MultiSensor 7

Question 16

Charles Americanos

This is a large price reduction..Does it suggest you are no longer going to stock this item EZLO ATOM V2?

Asked 1 year ago 1 answer

Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 17

Daniel Verhaal

Hi, Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows âin stock soonâ, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)? Thank you in advance! Kr, Daniel

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Heavy Duty Switch

Question 18

Daniel Verhaal

Hi,Regarding the Z-Wave Plus Aeotec Z-Stick 7, it shows “in stock soon”, what does this mean, do you happen to have more info (eta) on this? Also, I presume when I buy this product the frequency band will be comply with EU (as I am living in Holland)?Thank you in advance!Kr,Daniel

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Z-Stick 7

Question 19

David Ryan

Will these dimmers work with Zipato Zipabox 2?

Asked 1 year ago 1 answer

Z-wave plus aeotec z-pi 7

Question 20

Ken Holton

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion: https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429 I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch.

Asked 1 year ago 1 answer

Z-Wave Qubino Flush Relay x 2 Plus

Question 21

Ken Holton

Before buying this I wonder if anyone has tried the Smartthings Web driver reassignment as in this discussion:https://community.smartthings.com/t/fibaro-fgs-224-any-experience-dh/199429I see @johan has asked a similar question. I cannot find any published drivers for Smartthings other than this forcing the device assignment as double switch.

Asked 1 year ago 1 answer

Z-Wave Fibaro Double Smart Module

Question 22

Nick Zoryk

LED Light Strip Warm White - 2700 Kelvin ...... - is this dimmable using Fibaro universal dimmer 2 ?

Asked 1 year ago 1 answer

Z-Wave plus säker väggtermostat med LCD-skärm

Question 23

Nick Zoryk

LED Light Strip Warm White - 2700 Kelvin ...... - is this dimmable using Fibaro universal dimmer 2 ?

Asked 1 year ago 1 answer

LED Light Strip varm vit - 2700 Kelvin

Question 24

Nir

Hellow, is this product will work in israel with existing modules? where the zwave frequancy is 916?

Asked 1 year ago 1 answer

Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 25

alkis

Hi, will this remote work with Vera so it can arm and disarm the alarm?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Smart Switch 6 - UK

Question 26

Mark

Can't add this to Homeseer - just errors on Addnode.Also, previously with version 6 I have a poe splitter to power it.With this version it doesn't seem to work and a USB to micro usb is supplied. Presumably I need to poe split differently??? ( not entirely sure why it doesn't power )

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec MultiSensor 7

Question 27

David

Should I expect the internal battery to be reporting at 60% when fresh out of the box?Does it charge overtime?

Asked 1 year ago 1 answer

Z-Wave Heatit Z-Smoke Detector - 230V

Question 28

Tim L

Are these for UK or EU sockets?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Range Extender 7 (Double Pack)

Question 29

Zoltan

Hi, Is this device compatible with EU zwave standarsd, or it is only for US zwave protocol?

Asked 1 year ago 1 answer

Yale Keyless Connected Smart Lock - Connected Ready - No Module

Question 30

Andrew Stanley

Is this supplied with a schuko-to-UK adapter?

Asked 1 year ago 1 answer

AEOTEC RANGE Extender 7 - EU-uttag

Question 31

David

Does this unit work as a dimmer for a light circuit connected directly?

Asked 1 year ago 1 answer

Z-Wave Plus V2 Heltun Touch Panel Switch - ONE Pulsante - Bianco

Question 32

Chris Parker

The marketing and product box for this item promotes that you can plug it in and power it from a nearby socket. They show this in the manual for the US 110v version , but for the UK/EU 230v version it suggests it has to be hard wired into the main consumer unit ?As I have a socket right next to the consumer unit? Please could someone explain why I can’t connect the power cable to a UK plug and power it, rather than pay for an electrician to hardwire it?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Question 33

Richard Evans

Sensor 6 has several flaws. Reset button link via a piece of dodgy plastic, poor light level reading, poor UV reading.Apart from these, it was very good. Have they been addressed in Sensor 7? E.G. What range is read for the light level?Can I trust the reset mechanism? Can I assume it will work well with RaZberry?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec MultiSensor 7

Question 34

liam p mcgrath

Zigbee Frient Motion Sensor Hi does the light sensor function work with SmartThings?Thanks

Asked 1 year ago 1 answer

Zigbee Frient Motion Sensor Pro

Question 35

Phil Jones

Will this work with lights and smart plugs connected via a Hue gateway? More specifically, I am using Home Assistant with a Hue gateway controlling a mix of Ikea Tradfri and other brands of bulbs/smart plugs. I am looking for a wall-mounted controller that Home Assistant can see and that ideally can control lights directly in case the hub loses connectivity.

Asked 1 year ago 1 answer

Vesternet Zigbee väggkontroller - 8 knapp

Question 36

Daniel

Is there is voltage leakage with 3 wire setup or is it only present in 2 wire setup?

Asked 1 year ago 1 answer

Vesternet Z-Wave Dimmer

Question 37

Alex

Does this work with Home Assistant?

Asked 1 year ago 1 answer

Vesternet Dimmer Zigbee.

Question 38

Richard Blatch

Can this MCO MH7H-EH V2 thermostat be used to control both Electric Under Floor heating and a Towel warmer, but both independantly from each other please?If not, is there an alternative product which can do this ?Many thanks,Richard BlatchBoxford Suffolk

Asked 1 year ago 1 answer

Z-Wave Plus MCO Home Aquecimento Elétrico Termostato Com Sensor de Umidade - V2

Question 39

Robin

Are these interlinked via radio frequency (separately to the zwave) to make them suitable for use in Scotland under the new regulations starting February 2022?

Asked 1 year ago 1 answer

Z-Wave Plus Popp Smoke Sensor with controllable Siren (2-in-1)

Question 40

Richard

Is there a button on the plug-switch to enable me to over-ride the light etc on/off please?

Asked 1 year ago 1 answer

Z-Wave Plus Secure Smart Plug Switch

Question 41

Peter Bright

Are the contacts in this model 'dry'? I want to use the module to momentarily connect a separate 12VDC circuit. (Mimicking a make/break switch.)Already have many FGS211/FGS221 modules which are dry. But want to make sure there is no change of internal circuitry for this module.

Asked 1 year ago 1 answer

Z-Wave Fibaro Kaksoiskytkin 2

Question 42

Colin Docherty

I was wondering if I could use the SIR321 to control an immersion heater in my hot water tank, using the thermostat cable under the jacket so that I can monitor the temperature in the tank ?

Asked 1 year ago 1 answer

Z-Wave Plus Secure Wall Switch

Question 43

Johan

Hi I am unable to get the Fibaro FGS-224 Double Smart Module to work with Samsung SmartThings Hub v3. I have managed to get it to pair with the v3 hub but only as a generic multifunction device. Only one channel works as a switch. Regards Johan

Asked 1 year ago 1 answer

Z-Wave Fibaro Double Smart Module

Question 44

Liam

Is the battery replaceable?

Asked 1 year ago 1 answer

Z-våg plus heiman rök sensor

Question 45

imran simjee

Which zwave dimmer modules will this work with?

Asked 1 year ago 1 answer

Vision Dimmer Bypass

Question 46

Mr. David Webster

Can you please confirm which version of ZigBee this interface uses? Is it Hue ort SmartThings compatible? The photo doesn't show a ZigBee logo and suggests that it is 2.4GHz RF only control?

Asked 1 year ago 1 answer

Zigbee Controller For RGB And CCT LED Strip

Question 47

Kristjan

Manual says "Maximum length of wires: 3 meters". Is that really the case and does it apply for both input and output wiring? Thinking of installing these on the DIN rail with Eutonomy housings, but 3-meter cable restriction would make this impossible.

Asked 1 year ago 1 answer

Z-Wave Fibaro Double Smart Module

Question 48

Mark Harvey

Please could somebody advise me of the hole centre dimensions of the mounting bracket ? I need to fix the mounting bracket directly to an existing UK metal back box. Thank you.

Asked 1 year ago 0 answers

Z-Wave Remotec Scene Master

Question 49

Gil

what is the size of the motion sensor?

Asked 1 year ago 1 answer

Zigbee AEOTEC Smarthings Sensor de movimiento

Question 50

Jimmy

How is this different from the earlier version?

Asked 1 year ago 1 answer

Z-våg plus heiman smart rök sensor 2

Browse by Topic

Tools

Share This Page