Question 1

Lloyd

Hi, is it possible to remove the logo from the front easily?

Asked 1 year ago 1 answer

Z-Wave Plus MCO Home Glass Touch Dimmer

Question 2

Kristian Fritzen

Hi, is this compatible with Futurehome smarthub? (Model: CUBE-1V1-EU)

Asked 1 year ago 1 answer

Z-Wave Plus Eurotronic Air Quality Sensor Z-Wave Plus (VOC-sensor)

Question 3

Rob

How do these behave after a power cut is restored? Can the behaviour be configured like hue bulbs, for example last state? Thanks.

Asked 1 year ago 0 answers

Zigbee Aduro B22 Bulb - Tunable Colour

Question 4

Richard

Hi would this be compatable with a wired ring video doorbell to allow me to open a gate remotely

Asked 1 year ago 1 answer

Z-WAVE POPP elektronisk dörröppnare kontrollmodul

Question 5

Frankie

what is the z-wave frequency, i assume it is 868mhz?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 6

Baz Whitfield

Hi, I have one of these (SCS317) and haven't had much success adding it in to my Homey network, other than a generic device. Any advice or tips on how to add this would be gratefully received. Thanks

Asked 1 year ago 1 answer

Z-Wave Plus Secure 7 Day Programmerbar rumstermostat

Question 7

asaf cohen

Hello, I have many facilities in different places {hundreds} and I want to manage the entry permits for different suppliers. I would be happy if you get back to me how can this be done? asaf cohen

Asked 1 year ago 1 answer

Poly-Control Extendable Security Cylinder for Danalock V3

Question 8

Steve

This says Pi4 compatible but in the supporting documentation it says "not without un-powered USB hub)". Some have said that this is the latest version of this Z-stick but according to the Aeotec site there is a later version called Aeotec Gen5+ which is compatible with a Pi4 without having to use a USB hub. Anyone able to clarify this please?

Asked 1 year ago 3 answers

Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 9

Jez Phillips

I see you only have the EU version in stock. What is the difference to the UK version, is it just the plug? ie could I simply put a UK plug on an EU version or use an adapter?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Doorbell 6

Question 10

Anon_UK

Would this work with a LightwaveRF Hub?

Asked 1 year ago 1 answer

Z-Wave Remotec Scene Master

Question 11

Doron

Is it support EU frequency (868.42)?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Trisensor

Question 12

Robin

Does this 'smart cable' have a physical power switch, similar to the discontinued Swwidinter zwave cord switches, or is it remote control only.

Asked 1 year ago 0 answers

Zigbee Frilig Smart Cable

Question 13

Rob

What’s the rated inductive load in amps for this? Many thanks.

Asked 1 year ago 1 answer

Zigbee Frilig Smart Cable

Question 14

Mike

Does this integrate into smasung smartthings like the fire detector?

Asked 1 year ago 1 answer

ZigBee Frient Intelligent Heat Alarm

Question 15

Vince

Do you have to have smartthings to go with this bridge or does the bridge connect directly to to my WiFi router ? Thank you

Asked 1 year ago 1 answer

Danalock Danabridge

Question 16

Grat

I plan to use these for patio and window drop-arm awnings. The awning company supply the following motors: - the awning uses a Somfy Orea WT 35/17 - the drop arms use a Somfy Orea WT 15/17 Can anyone advise whether these Fibaro Roller Shutter 3s are compatible and if there is anything in particularly that I need to be alert of in installing?

Asked 1 year ago 1 answer

Z-Wave Fibaro Roller Shutter 3

Question 17

Malcolm

I have several Qubino Mini Dimmer modules in my current set up - HomeSeer with Aeotec Z-Stick controller. Can I substitute one of these for the Qubino module?

Asked 1 year ago 1 answer

Vesternet Z-Wave Dimmer

Question 18

Paul Egan

Hi, I was wondering if this would work with Economy 7 electricity, meaning does it have an internal battery to keep it on and connected to the network when economy 7 isn't active? I'm wondering if it is possible to make economy 7 storage heaters smarter. Thanks.

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Heavy Duty Switch

Question 19

Dan

Hi. Would I be able to use this at the same time as a Razzberry board or do they both require the same part of the gpio header (Pi3)?

Asked 1 year ago 1 answer

Zigbee Popp Zb-Shield

Question 20

imran

Is there a battery included, just so I know if i need to order a seperate one or not, Thanks.

Asked 1 year ago 1 answer

Zigbee AEOTEC Smarthings Sensor de movimiento

Question 21

David Thackray

Hi, I'm assuming I'll be able to control the Zigbee Popp Smart Thermostat via my Homey Hub. Can you confirm please? Many thanks David

Asked 1 year ago 1 answer

Zigbee popp smart termostat

Question 22

Rob

Can these alarms link together, so if one senses smoke they all go off?

Asked 1 year ago 1 answer

Z-våg plus heiman smart rök sensor 2

Question 23

Mark

Will the switch send instant status updates back to Vera? To answer the review where this wasn't working I ended up finding the solution here https://community.ezlo.com/t/heltun-he-tps04-and-vera-lite-experience/217229

Asked 1 year ago 0 answers

Z-Wave Plus V2 Heltun Touch Panel Switch - Four Buttons - White

Question 24

Chris Boyle

Hi, can this camera send images/video to my PC using FTP or some other protocol?

Asked 1 year ago 1 answer

Aeotec SmartThings Cam 360

Question 25

James Fasal

What is the length of the new Q-Reader lead between the pulse module and the data logger. I have a long distance (approximately 22m) between the meter (located next to road) and the house and propose to connect the pulse module to the requisite cores of a CAT5e cable (already laid underground) and then connect the Q-Reader within the house where it can connect via z-wave to my hub. Is this proposal possible if the cable is not long enough?

Asked 1 year ago 1 answer

Z-Wave Data Logger til e-meter

Question 26

David C

Is this also compatible with the Raspberry Pi 400 running Home Assistant? Or is there a suitable alternative I should look at?

Asked 1 year ago 2 answers

Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 27

Andrew Cherry

Is this the latest (2019, green) version of this board, or the slightly earlier (2018, blue) version? Obviously the photo shows a blue one, but good to know for sure!

Asked 1 year ago 1 answer

Z-Wave.me RaZberry 2 PI GPIO Daughter Card - Gen5 - New

Question 28

Blair

They were £24.99 before now £34 I'd call that a big difference.

Asked 1 year ago 0 answers

Zigbee AEOTEC Smarthings Sensor de movimiento

Question 29

Blair

Why has the prices gone up so much for what is just a rebrand.

Asked 1 year ago 1 answer

Zigbee AEOTEC Smarthings Sensor de movimiento

Question 30

ThibaultDC

Is it resistant to condensation/waterproof? What is the operating humidity range?

Asked 1 year ago 1 answer

Z-Wave Fibaro Multi Sensor

Question 31

ThibaultDC

Does it include an acceleration sensor (accelerometer or any kind of vibration sensor) for door knocker detection?

Asked 1 year ago 1 answer

Z-Wave Technisat Door/Window Sensor

Question 32

John Shaw

Would this work with an existing KwikSet deadbolt? Thanks.

Asked 1 year ago 1 answer

Z-våg och Bluetooth poly-control Danalock v3

Question 33

JOSE LUIS

Hello, I bought it a month ago. What estimated date will it there be stock? When will I receive it?

Asked 1 year ago 1 answer

Aeotec SmartThings Cam 360

Question 34

Stuart

Can you confirm I would receive the newer version of the ZMNHOD1 module? With updated flash And S7 firmware. The older ones have H1S5P1 printed on the sticker after the model number ZMNHOD1, these cannot be updated to the S7 firmware. Thanks

Asked 1 year ago 1 answer

Z-Wave Qubino Flush Shutter DC

Question 35

Carlo

Is it compatible with google assistant? Can I stream it through a Google Nest Hub?

Asked 1 year ago 0 answers

Aeotec SmartThings Cam 360

Question 36

John

Hi, is this smoke detector compatible with Samsung SmartThings Hub?

Asked 1 year ago 1 answer

Z-Wave Plus Abus Z-Wave Smoke Sensor

Question 37

Nigel

Available as UK three pin yet?

Asked 1 year ago 1 answer

Z-Wave Plus Aeotec Smart Switch 7

Question 38

Angus

When will this item be in stock?

Asked 1 year ago 1 answer

Zigbee AEOTEC Smarthings Sensor de movimiento

Question 39

Doru Hriscu

When will this items be on stock :AEOTEC Smartthings motion sensor,door sensor, button ,etc.

Asked 2 years ago 1 answer

ZigBee Aeotec SmartThings Multipurpose Sensor

Question 40

Chris

Hello, I have an issue with Hubitat's z-wave range, does this device also function as a z-wave repeater?

Asked 2 years ago 1 answer

Z-wave plus aeotec nano dimmer

Question 41

Rachel Hadley

How long is the mains cable please?

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Siren 6

Question 42

Rob Scott

Is the Aeotec motion sensor the same as the Samsung in terms of range and sleep time after detecting motion?

Asked 2 years ago 1 answer

Zigbee AEOTEC Smarthings Sensor de movimiento

Question 43

Harvey clements

When will smart buttons will be in stock I have one on order about 8 weeks approx and want to order more items all out of stock In antisipation Harvey

Asked 2 years ago 1 answer

Zigbee Aeotec SmartThings Button

Question 44

Desmond Moore

Is this device the same as the Z wave Gen 5 +? The Gen 5 (older version) is not compatible with Raspberry Pi, however, the Gen 5 + is, refer Aeotec info: https://aeotec.com/z-wave-usb-stick/

Asked 2 years ago 1 answer

Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 45

Graham

Will this pair with the ring alarm system for use in the uk

Asked 2 years ago 1 answer

Z-våg plus heiman smart rök sensor 2

Question 46

Nicholas Tangney

Hi, do I need the switches (as shown in the video) ? Or can I just set up some scenes in my homecentre?

Asked 2 years ago 1 answer

Z-Wave Fibaro RGBW Controller 2

Question 47

Stephen Maxwell

How close does the door open sensor need to be to the main unit?

Asked 2 years ago 1 answer

Z-Wave Philio Multisensor - Dörr / PIR / LIGHT / TEMP - Gen5

Question 48

Youra

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks!

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec MultiSensor 6

Question 49

John W

Is there any reason why these Fibaro Roller Shutter 3 models will not work with a 4 wire 230V AC curtain motor (open, close, neutral, earth)?

Asked 2 years ago 1 answer

Z-Wave Fibaro Roller Shutter 3

Question 50

John

Hi In the picture it’s showing two readings - is one the set point and the other Actual room temp ? Which way round are there Is this compatible with Vera Plus ?

Asked 2 years ago 1 answer

Z-WAVE-värme termostat Z-TEMP 2

Browse by Topic

Tools

Share This Page