Question 1

Stephen Maxwell

How close does the door open sensor need to be to the main unit?

Asked 2 years ago 1 answer

Z-Wave Philio Multisensore - Porta / PIR / Luce / Temperatura - Gen5

Question 2

Youra

As this can be powered from a 5V supply, and I already have wiring in place bringing 12V to existing alarm system sensor locations, does anyone know if there is an off-the-shelf 12V -> 5V converter that will do the job? There is a reference to such a thing in a question from 2017, but nothing that I can find to buy off-the-shelf. Thanks!

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec MultiSensor 6

Question 3

John W

Is there any reason why these Fibaro Roller Shutter 3 models will not work with a 4 wire 230V AC curtain motor (open, close, neutral, earth)?

Asked 2 years ago 1 answer

Z-Wave Fibaro Roller Shutter 3

Question 4

John

Hi In the picture it’s showing two readings - is one the set point and the other Actual room temp ? Which way round are there Is this compatible with Vera Plus ?

Asked 2 years ago 1 answer

Z-Wave Heatit Thermostat Z-Temp 2

Question 5

Tony

Hi, Would anyone have any schematic diagrams to show how to install this device to arm a hardwired and non-smart alarm system? Thanks

Asked 2 years ago 1 answer

Z-Wave Fibaro Smart Implant

Question 6

Doru Hriscu

Just wondering if you shipp to Cyprus,and also would I need a Samsung Smartthings account on a UK address (region) as I saw many comments that this hubs are theoretically for US/UK market ,will it function normally with an European account via the Samsung app? Feedback much appreciated . Thanks

Asked 2 years ago 1 answer

Aeotec SmartThings Hub (V3)

Question 7

Raymond

Have NorthQ updated this product to a Q-Reader?

Asked 2 years ago 1 answer

Z-Wave Registador de dados para E-Metros

Question 8

Enrico Kersten

Dear Vesternet, Works Heatit z-smoke correct with fibaro HC3? Thanks. Enrico Kersten

Asked 2 years ago 1 answer

Z-Wave Heatit Z-Smoke Detector - 230V

Question 9

Steve

Do you know when the Hubitat Elevation Model C-7 Hub will be back in stock?

Asked 2 years ago 1 answer

Hubitat Elevation Model C-7 Hub

Question 10

Marcus

When do you expect these back in stock? It's the only one missing from me placing an order for about 6 units.

Asked 2 years ago 1 answer

Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 11

cw-kid

Hi Is it possible to interlink two or more of these Z-Wave smoke sensors ? So when one detects smoke and sounds its siren alarm, to have a second smoke sensor also sound its siren ? I cannot see anything in the user manual and using either Group 1 or 2 association groups doesn't seem to work. Thanks

Asked 2 years ago 1 answer

Sensore di fumo Heiman

Question 12

James

If the mains adapter is used with this, can the battery still be used as a backup power source if the mains power is cut?

Asked 2 years ago 1 answer

Z-Wave plus czujnik dymu POPP z sterowaną syreną (2-w-1)

Question 13

Jari-Matti Karjanmaa

Philio 2 in 1 Temperature/Humidity Sensor. What is accuracy of measurements? What is battery life if polling every 30 minutes?

Asked 2 years ago 1 answer

Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

Question 14

THOMAS LAWRENCE NERLING

Does this work with Samsung Smarthings?

Asked 2 years ago 1 answer

Z-Wave Qubino Flush Relay x 2 Plus

Question 15

Christopher Riley

Does this require neutral or can it replace a lightswitch in a 2 wire setup?

Asked 2 years ago 1 answer

Z-Wave Plus v2 Heltun Touch Panel Switch - Två knappar - Vit

Question 16

Richard

Hi Is this compatible with an iTec Home Zwave gateway https://www.itechome.co.uk/products ? Thanks

Asked 2 years ago 1 answer

Popp 433 Bridge - White

Question 17

Philip Clarke

Is the logo on the front removable ?

Asked 2 years ago 1 answer

Z-Wave Plus MCO Home Glass Touch Dimmer UK

Question 18

Rahim

When is this thermostat going to be available? Also, will it work an electric underfloor heating system?

Asked 2 years ago 0 answers

Z-Wave Plus V2 Heltun-verwarmingsthermostaat

Question 19

Neville Briggs

Hello, I'm looking to update my secure 321 Thermostat with something that looks a bit more modern but it needs to be battery driven do you have anything that will work with the secure 2 channel receiver I just purchased from you, thanks

Asked 2 years ago 1 answer

Z-Wave Plus MCO Home Fan Coil Thermostat - 2 Pipe - Black

Question 20

Terry Rumsey

Hi, me again, I asked the below question but gave the wrong terminology. I was referring to the swivel base unit. Thanks Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you Answers (1) Anonymous 28/10/2020 If you mean the recessor adapter ( https://www.vesternet.com/products/z-wave-aeotec-recessor-for-multisensor-6 ) then the dimensions are listed in the product details ( 1.2cm above surface, 4.4cm below surface )

Asked 2 years ago 0 answers

Z-Wave Plus Aeotec MultiSensor 6

Question 21

Terry Rumsey

Could someone tell me the measurement from back to front when mounted on the wall plate adapter? Thank you

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec MultiSensor 6

Question 22

Neville Briggs

Hello I bought one of these from you a few years ago, I dont think it is zwave plus, are these new ones? thanks

Asked 2 years ago 1 answer

Z-Wave Plus Secure Wall Thermostat with LCD display

Question 23

Greg

Will this be able to control 2-way lighting circuits?

Asked 2 years ago 1 answer

Z-Wave Plus v2 Heltun Touch Panel Switch - Fyra Knappar - Vit

Question 24

Tim Hills

Hi, Will this work with Samsung SmartThings, controlling the duo switch independently. If not, can you advise what switches will? Thanks

Asked 2 years ago 1 answer

Z-Wave Plus v2 Heltun Touch Panel Switch - Två knappar - Vit

Question 25

om

does this can be use as range extender (mesh). as you know most of z-wave product that work on battery dont transmite to thier Neighbors command but z-wave ac plug product do

Asked 2 years ago 1 answer

Z-Wave plus czujnik dymu POPP z sterowaną syreną (2-w-1)

Question 26

Chris

Could I use this to control a 12.5kw shower

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Heavy Duty Switch

Question 27

bob haskins

Is this compatible and will reliably work with Vera Secure?

Asked 2 years ago 1 answer

Z-WAVE PLUS POPP Flow Stop 2

Question 28

Akif Sadique

Hi I would like to install this into a air conditioning/ heating system would you be able to offer me some assistance if I was to supply you with the make and model no of the Ac/ Heating unit ?

Asked 2 years ago 2 answers

Z-Wave Fibaro Smart Implant

Question 29

Willie Taylor

I have a Danalock and want to remotely open the lock when away from the house, will this allow me to do this on my phone with 4g or do I require to have wifi signal ?

Asked 2 years ago 1 answer

Danalock Danabridge

Question 30

Eric

Hi, Will this switch work with gateway such as Vera and Homey? And when do you plan to have it in stock. Thanks!

Asked 2 years ago 1 answer

Z-Wave Plus V2 Heltun Touch Panel Przełącznik - pięć przycisków - biały

Question 31

Stephen Summerfield

Is the relay single pole or double pole (ie does it switch only the live connection or both L and N connections)?

Asked 2 years ago 1 answer

Z-Wave Heatit Z-Relay - 16A

Question 32

Ray Shields

There is no mention about power supply in the spec or how to use. I assume its batteries? Standard 2032s?

Asked 2 years ago 3 answers

Z-WAVE PLUS POPP Flow Stop 2

Question 33

John Chapman

I have several of these devices and wish to use them with Home Assistant. I have managed to lose the little document that came with them. Can you tell me what values I should use to know when the sensor has detected smoke, please? Many thanks, John Chapman

Asked 2 years ago 1 answer

Sensore di fumo Heiman

Question 34

Robert

Hi do you know if these support Triac dimmable as required by these downlights ? https://www.electrical2go.co.uk/jcc-v50-colour-selectable-fixed-fire-rated-led-downlight-7w-650lm-ip65-white.html Thanks Rob

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Nano Dimmer

Question 35

Ahmed AlShami

Dear Sir i want ask you about the switch in wich frequency do u have it . and do have it in stock . Thanks

Asked 2 years ago 1 answer

Z-Wave Plus V2 Heltun Touch Panel Przełącznik - pięć przycisków - biały

Question 36

Mark

Is this the latest 2020 upgraded model (“Z-Stick Gen5&#43“) that will work with a Raspberry Pi 4 directly without the need for an external USB hub?

Asked 2 years ago 0 answers

Aeotec Z-Stick Gen5 USB Controller (NEW Raspberry Pi 4 compatible)

Question 37

C. N.

I'm looking for a standalone DC power supply to go with this unit. Does anyone here have any recommendations?

Asked 2 years ago 1 answer

Z-Wave Fibaro Smart Implant

Question 38

Daniel Spittle

Could I use this module to control 300w towel radiator

Asked 2 years ago 1 answer

Z-Wave Qubino Flush Relay x 1 Plus

Question 39

Marc Thach Xuan Ky

Is this just a repeater or does it actually boost signal higher and receive with greater sensitivity than other repeaters such as built into the Aeotec Z-Wave Plus Aeotec Smart Switch 6?

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Range Extender 6 - UK Socket

Question 40

Arturo

has anyone tested it with Fibaro Home Center 2? Does it work ok?

Asked 2 years ago 1 answer

Z-Wave Qubino Flush Shutter Plus

Question 41

Daryll

Will I be able to use the RaZberry 2 with it's Z-way software as a secondary controller on my Hubitat to analyse Z Wave Network and remove any ghost nodes and troubleshoot any routing issues. I know this is possible with Silicon labs PC controller and a UZB Stick but I do not own a PC.

Asked 2 years ago 1 answer

Z-Wave.ME Carte de fille GPIO PI GPIO - GEN5 - Nouveau

Question 42

Anthony

Is there a UK plug version available?

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Smart Switch 7

Question 43

Mark B

How long is the sensor lead? and it be lengthened if needed?

Asked 2 years ago 1 answer

Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 44

Lenny

Will this work in the states?

Asked 2 years ago 1 answer

Athom Homey Pro

Question 45

Christopher McGarry

Would this be able to control non dimmable LEDs?

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Dual Nano-omkopplare med strömmätning

Question 46

Tony Colin

Do you have any info when Aeotec's 700 series Zwave Controller (that they acquired from Popp) is expected to appear. Trying to make an intelligent choice to replace aging Vera unit and leaning towards the Hubitat, mostly because it's the only one available!

Asked 2 years ago 1 answer

Hubitat Elevation Model C-7 Hub

Question 47

Mattias

Will it be the new c-7 in stock late July ? Do you ship to Sweden? /Mattias

Asked 2 years ago 1 answer

Hubitat Elevation Model C-7 Hub

Question 48

James

I have a Vera Plus at the moment and am looking to move to the HC3. I use the dataMine2 plugin on Vera for getting graphs of data over time. Does the HC3 have similar functionality?

Asked 2 years ago 1 answer

Fibaro Home Center 3

Question 49

Alan

Would you have the UK version (3 pin) version ? Thanks Alan.

Asked 2 years ago 1 answer

Aeotec Range Extender 7 - EU Socket

Question 50

Mitul Patel

Hi Just a follow-up question about import/export power. Is this able to monitor flow direction from one clamp -> i.e. whether my solar system is exporting or not to the grid? Mitul

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Clamp Power Meter - One Clamp (60A)

Browse by Topic

Tools

Share This Page