Question 1

Robert

Hi All After years of trying to find a good zwave remote control I think I might have hit on a good (crazy) idea. Would this module work behind a light switch if there was no output load to control ? My plan is to use something like this https://www.ukelectricalsupplies.com/retrotouch-07100-simplicity-white-2-gang-retractive-light-switch.htm, so i should get the ability to control four scenes, using s1 and s2 Would I be correct that it will work with out a light to control. Thanks Rob

Asked 2 years ago 1 answer

Z-Wave Fibaro Universal Dimmer 2

Question 2

Juan

Hi Are there for 2 or 3 wire systems? Does it need a neutral cable? Kind Regards Juan

Asked 2 years ago 1 answer

Z-Wave Fibaro Smart Module

Question 3

Alex L

Does this module work with the Hunter Douglas M25S 24V motor used in Luxaflex Duette blinds? https://motorisation.hde.nl/wired/24V/Motors/M25S/M25S-data-sheet/M25S-data-sheet.pdf On paper it all looks good but I know sometimes that doesn't work out in practice when motors have soft start/stop

Asked 2 years ago 1 answer

Z-Wave Qubino Flush Shutter DC

Question 4

Mark

Hi, how well does this work with SmartThings and in particular the energy monitoring? Many thanks Mark

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 5

Mark

How well does this device work in Smartthings and in particular will Smartthings report power usage? Many thanks

Asked 2 years ago 1 answer

Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 6

Marcelo

Hello! Do you have for RGBW Fibaro module? Thanks.

Asked 2 years ago 1 answer

Adattatore EUFIX EUFIX DIN per FIBARO Dimmer 2

Question 7

Emma Gifford-Pike

How well do these sensative drip sensors work in carpetted areas. I have 2 areas of my house where we have experienced leaks and both have carpet. If these are not suitable can you recommend a z-wave sensor that might work?

Asked 2 years ago 1 answer

Z-Wave Sensative Drip - Gen5

Question 8

Derek B

What model is this? is it the C5 Version?

Asked 2 years ago 1 answer

Hubitat Elevation Model C-7 Hub

Question 9

L-o

Hi, Is this the hubitat elevation c5 version? /L-O

Asked 3 years ago 1 answer

Hubitat Elevation Model C-7 Hub

Question 10

Chris

Please can you provide a guide to use the aeotec nano shutter to motorise Venetian blinds for tilt, raise and lower?

Asked 3 years ago 1 answer

Z-Wave Plus Aeotec Nano Shutter

Question 11

Yehuda Moyal

If I put the relay on momentary mode and press the momentary switch once (and release), the light that connect to relay output will stay at ON (toggle) till I press the momentry again, is that correct? If so, does it means that for 2 way implementation I just need 2 momentry switches connect in parallel to the same input at the qubino 2 relay and every press on one of the momentry switch will toggle the light to ON or OFF? I can't find such suggestion in you app notes guides. Thank you!

Asked 3 years ago 1 answer

Z-Wave Qubino Huuhtelurele x 2 Plus

Question 12

Alessandro

What is the power consumption in watts?

Asked 3 years ago 1 answer

Fibaro Home Center 3

Question 13

Paul Brain

Why does the Aeotec Multi 6 report a 23 lux when my Philips Hue sensor reports 14606 lux in virtually the same position. I've tried it with 3 Aeotec Multi 6s now with the same sort of difference, I'm concerned because I want to use to switch on lighting when required? They even report 0 lux when there is enough light to read a book!

Asked 3 years ago 4 answers

Z-Wave Plus Aeotec MultiSensor 6

Question 14

HITEN

I can see the 2 and 3 way wiring diagrams without a neutral. Do you have a 2 and 3 way wiring diagram with a neutral? Thanks.

Asked 3 years ago 1 answer

Z-Wave Fibaro Universal Dimmer 2

Question 15

David

The manual says the max cable length is 2m. Is this the length of cable from the unit to Led strip or the Led drip itself?

Asked 3 years ago 1 answer

Z-Wave Fibaro RGBW Controller 2

Question 16

James

will this work with fibaro dimmer 1 ?

Asked 3 years ago 1 answer

Z-Wave Plus Aeotec Nano Dimmer Bypass

Question 17

John

Can this Aeotec button connect directly to Smartthings?

Asked 3 years ago 1 answer

Aeotec Button

Question 18

David Harkins

Has anyone managed to get these working with HomeSeer v3? I am having difficulties getting all four switches to function in HS3. All four Lights function, but my use case needs the binary switches, not the lights. Every time I exclude and include it's a different combination of Switches that don't work. The lights have worked every time so far.

Asked 3 years ago 1 answer

Z-Wave Plus Aeotec WallMote Quad

Question 19

Nicholas Furr

Have these yet been proven to work with Vera Edge or Vera Plus? I have installed one and whilst, after hours working on-line (computer and telephone) with a Micaverde technician (or two), the binary function works, we can get no sensible response from the 2 x DS18B20 connected.

Asked 3 years ago 1 answer

Z-Wave Fibaro Smart Implant

Question 20

Stephen Kirrage

I'm about to include this item in my system run by a Vera Edge. The inclusion routine on the Edge offers me the PAT02-C (flood sensor) and the PAT02-B (Temp/Humidity sensor) and a number of other Philio sensors but not the PAT02-A which is this item. Any suggestion what I should choose? I am reluctant to go with Generic Z-Wave device because experience has taught me this does not work well with multi element devices.

Asked 3 years ago 1 answer

Z-Wave Philio Multisensor - Flood / Temp / Humidity - Gen5

Question 21

HKS

We are rewiring the house and as part of this will have a neutral at each switch. Two questions I have are 1) for loads less than 50W is a bypass still required even in a 3 wire setup? 2) is there a cheaper alternative to the fibaro which still offers smooth LED dimming? Thanks.

Asked 3 years ago 1 answer

Z-Wave Fibaro Universal Dimmer 2

Question 22

Paul

Will this sensor detect leaking natural gas. Ie if you knock the gas ring on the cooker and don’t light it

Asked 3 years ago 1 answer

Z-Wave Plus Heiman Gas Sensor

Question 23

wilf

How long does the battery last? i.e. how long between charges?

Asked 3 years ago 1 answer

Z-Wave Fibaro patteritermostaatti Starter Pack

Question 24

Michael Sheehy

does this price include VAT

Asked 3 years ago 1 answer

Z-WAVE FIBARO CO-sensor

Question 25

Nicklas

Hi, Does this work with Yale Doorman that we have in Sweden? Best regards

Asked 3 years ago 1 answer

Yale Smart Living Z-Wave Module 2

Question 26

David Moors

Could the solar outdoor siren be used in conjunction with Ring Smart alarm system, which is supposedly Z-Wave compatible?

Asked 3 years ago 1 answer

Z-Wave Popp Solar Outdoor Siren 2

Question 27

Andy

Has anyone got a preview of the UI (user interface) yet. Also, will the new ui use https rather than http?

Asked 3 years ago 1 answer

Fibaro Home Center 3

Question 28

Dror

Can the 3 phase clamp measure the current direction (negative current)? For example, when power is provided to the grid (by a solar system) when self consumption is low.

Asked 3 years ago 1 answer

Z-Wave Plus Aeotec Clamp Meter Meter - Trzy zaciski (60a)

Question 29

Martin

Will this work with SmartThings to trigger scenes?

Asked 3 years ago 1 answer

Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 30

Daniel

Is this item in stock?

Asked 3 years ago 0 answers

Fibaro Home Center 3

Question 31

Kris

I am thinking of buying a srt 321 to manage two electric radiators that have one zwave switch each. Is it possible to associate TWO nodeids in group 2 (on/off group) with the thermostat? Some forums say that you only can associate with one nodeid. Yes, I know that I can create scenes and automations in the controller, but I would like to do it locally as it is in the guesthouse and communication is not always reliable.

Asked 3 years ago 1 answer

Z-Wave Plus Secure Wall Thermostat with LCD display

Question 32

Stefan

When will you start shipping the HC3?

Asked 3 years ago 0 answers

Fibaro Home Center 3

Question 33

William Gunther

I have a question before I purchase this unit. We have installations where we install 100’s of devices at a time in building complexes. If your unit does not support the IR command set of a particular brand of A/C, I realize it must be trained using the original remote which came with the A/C unit. Since we do 100’s of installs over the course of a couple of days, is there a more efficient way to train these units besides doing it by hand, one at a time? Please advise. Thanks. Bill

Asked 3 years ago 1 answer

Z-WAALE REMOTEC ZXT-600 Z-WAALE + IR-laajennukseen AC

Question 34

MikeO

On Fibaro's website for this product it shows it being able to be installed in audio equipment but there are no references to that type of setup in the manual or instructions. Has anyone tried to use the implant in any appliance to make it smart? If so I assume the compatibility will be based on the appliance and the internal wiring if it can be done.

Asked 3 years ago 1 answer

Z-Wave Fibaro Smart Implant

Question 35

Trevor Bunner

Is this product compatible with the New z wave plus V2 , 700 series protocol ?

Asked 3 years ago 1 answer

Fibaro Home Center 3

Question 36

Steve Wilford

Does this definitely support frequencies and protocols other than Z-Wave and WiFi? There’s no mention of any others on the Fibaro website.

Asked 3 years ago 1 answer

Fibaro Home Center 3

Question 37

Nigel Wright

I currently run the SIR321 on Indigo Domotics, but I want to change to a simpler cheaper hub. Are these switches with the external probes compatible with either Veraplus or Samsung Smart things hubs?

Asked 3 years ago 1 answer

Z-Wave Plus Secure Wall Switch

Question 38

Clive Saddler

What is the difference between Fibaro's HC2 and new HC3? How long will Fibaro support HC2?

Asked 3 years ago 1 answer

Fibaro Home Center 3

Question 39

Richard Fitch

Hi, Will you be able to transfer existing devices, scenes etc from HH2 to the HH3 or will everything have to be done from scratch again?

Asked 3 years ago 1 answer

Fibaro Home Center 3

Question 40

Shauli Shamay

Do you have the EU version? Z-Wave Fibaro Wall Plug Gen5 I need something The will work with Israeli plugs

Asked 3 years ago 1 answer

Z-Wave Fibero Wall Plug - Schuko

Question 41

Naor

Hi , its z wave 868 hz (eu) ?

Asked 3 years ago 1 answer

Z-Wave Fibaro Whiti Outlet - Schuko

Question 42

Robertas Sefleris

At description it says: "and can also be operated by third-party controllers which support 'Thermostat Mode SET' commands or 'Binary Switch SET' commands." this is bit confusing, will it work with something like smart things hub or hubitat hub? for same idea, as one person already asked, like zoned heating with smart zwave trv's.?

Asked 3 years ago 1 answer

Z-Wave Plus Secure Boiler Receiver HRT Gen5

Question 43

Mark Collins

Aside from the upgraded chip, how does this differ from the standard the original RGBW Controller? Are there any benefits worth upgrading for?

Asked 3 years ago 1 answer

Z-Wave Fibaro RGBW Controller 2

Question 44

Manica

How does this get physically installed? Does it need a backbox/ pattress box?

Asked 3 years ago 1 answer

Z-Wave Plus Aeotec Smart Boost Timer Switch

Question 45

Stephen

Is this work with Samsung Smartthing V3 hub? Can I control the switch using google assistant via Samsung Smartthing Hub v3?

Asked 3 years ago 0 answers

Z-Wave Plus MCO Touch Panel Switch - Four Load - UK

Question 46

Stephen

Is this work with Samsung Smartthing V3 hub? Can I use it to switch on and off the philips Hue smart light with Hue Bridge?

Asked 3 years ago 1 answer

Z-Wave Remotec Scene Master

Question 47

Andrew MacLeod

Hi, controlling through a z-wave hub (Fibaro HC2) can this turn on and off other IR controlled devices ie ceiling fans, lights TV etc?

Asked 3 years ago 1 answer

Z-WAALE REMOTEC ZXT-600 Z-WAALE + IR-laajennukseen AC

Question 48

Gordon Campbell

Is this compatible with Vera Plus?

Asked 3 years ago 0 answers

Z-Welle plus Aeotec-Türklingel 6

Question 49

Tony

Does this come with a UK plug socket or a European plug socket?

Asked 3 years ago 1 answer

Z-Wave Plus Aeotec Siren 6

Question 50

Carey Jack

Hi does anyone know if this device is supported on the Fibaro Home Centre and if so what does the control panel look like?

Asked 3 years ago 1 answer

Z-wave qubino rgbw dimmer plus

Browse by Topic

Tools

Share This Page